Delphin Coder Bite Alarms Set | 2+1

The signal between the bite alarm and the receiver can be transmitted up to 140 m under ideal conditions. The entire set comes in a hard plastic case, ensuring the equipment's safety during transport.

The bite alarm is powered by 1x12V LR23A battery, which has a sufficiently long lifespan. If the battery level is low, an indicator will alert you with a short beep. Use the "V" switch to select one of 5 volume levels, including silent mode. You can also choose the desired tone and sensitivity level (1-9 cm), which also has 5 different levels. An undisputed advantage of the CODER set's bite alarms is the ability to choose from 7 LED colors. Everyone can pick their favorite, and if you want to change, you can simply select another color according to the instructions. A different sound will notify you of a bite, and the LED will light up for 15 seconds after each bite. At the bottom, there is a 2.5 mm jack input. It is also possible to activate the position light when fishing at night.

The receiver reliably signals a bite with sound, light, and, if the lever is set to the appropriate position, also with vibrations. Using the "V" switch, you can select one of 5 volume levels, including silent mode, and using the switch marked "T", select the desired tone. The receiver has four colored LEDs that light up continuously for 15 seconds after a bite. It is powered by a 1x9V battery. When its lifespan is nearing its end, this will be signaled by a continuous short beep. The receiver, like the bite alarms, stores all selected settings.

With this set, you can save a maximum configuration of 3 + 1 (3 bite alarms and one receiver).

The Delphin CODER set can be paired with the LightCONTACT lamp.

Technical parameters:

2 + 1 set includes:

- 2x bite alarms

- 1x receiver

- 1x transport case

- 1x belt clip for the receiver

RECEIVER / functions:

- 5 volume levels (V- button, including silent mode)

- 5 different signaling tones (T- button)

- Vibration mode (switch - right position)

- 4 colored signaling LEDs

- Stores selected settings in memory

- Two-position ON / OFF / VIBRATION switch

- Memory LED - lights up continuously for 15 sec. after a bite

- Low battery indicator (continuous beep)

- Set testing mode

- Range 140m depending on terrain

- Powered by 1x9V battery

BITE ALARM / functions:

- Waterproof

- 5 volume levels (V-button, including silent mode)

- 5 different signaling tones

- 5 sensitivity levels (S-button)

- 7 possible signaling LED colors

- Stores selected settings in memory

- Backbite signal - different tone

- Memory LED - lights up continuously for 15 sec. after a bite

- Low battery indicator with a short beep

- Night position LED

- Non-slip rod rest

- 2.5 mm jack input

- Powered by 1x12V (LR23A type)